5000W Surface Mount
Transient Voltage Suppressor
5.0SMCJ12A/CA – 5.0SMCJ170A/CA
5000W Surface Mount Transient Voltage Suppressor
Features
• Stand-off voltage from 12 to 170 volts
• Glass passivated chip junction
• Low inductance
• Excellent clamping capability
• 5000W peak pulse power capability with a 10/1000μs waveform,
repetition rate(duty cycle): 0.01%
• Fast response time: typically less than 1.0ps from 0v to VBR
SMC
• Low incremental surge resistance
• High temperature soldering guaranteed: 250°C/10 seconds at terminals
• 5.0SMCJ series is UL recognized under component index. File number E315008
• RoHS Compliant
Mechanical Data
Case:
Epoxy:
Terminals:
Polarity:
Mounting Position:
Weight:
JEDEC DO-214AB(SMC) molded plastic body over glass passivated junction
Plastic package has UL flammability classification 94V-0
Solder plated, solderable per MIL-STD-750,
Method 2026
Cathode indicated by color band except Bi-directional
Any
0.007 ounce, 0.21 gram
Maximum Ratings (T Ambient=25ºC unless noted otherwise)
Symbol
Description
PPPM
PM(AV)
Peak Pulse Power Dissipation at
TA=25° C by 10/1000μs Waveform
Power Dissipation on infinite heat sink
at TA=50° C
IFSM
Peak Forward Surge Current, Uni-
directional only
VF
Maximum Instantaneous Forward
Voltage at 100A for Uni-directional only
RthJA Typical Thermal Resistance to Ambient
Value
5000
6.5
300
5.0
75
Unit Conditions
W Note (1) (2)
W
8.3ms single half sine-wave or equivalent
A square wave, duty cycle=4 pulses per minute
maximum
V
° C/W
TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com
Tel: (800)-TAITRON (800)-824-8766 (661)-257-6060
Fax: (800)-TAITFAX (800)-824-8329 (661)-257-6415
Rev. D/AH
Page 1 of 7