Datasheet4U Logo Datasheet4U.com

GC-485 - Digital I/O Gage Heads

General Description

±0.125 inch gage head (Manual and software available on our web site) ±0.25 inch gage head (Manual and software available on our web site) ±0.5 inch gage head (Manual and software available on our web site) ±1.0 inch gage head (Manual and software available on our web site) OPTIONS Air extend/spring

Key Features

  • All-welded stainless steel construction.
  • MS type connector (MIL-C-5015).
  • Hardened tool steel contact tip.
  • High side load resistance.
  • Programmable filtering.
  • Calibration certificate supplied with each unit.
  • Air extend/spring retract available (consult factory).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer

Other Datasheets by TE Connectivity

Part Number Description

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
FEATURES  All-welded stainless steel construction  MS type connector (MIL-C-5015)  Hardened tool steel contact tip  High side load resistance  Programmable filtering  Calibration certificate supplied with each unit  Air extend/spring retract available (consult factory) APPLICATIONS  Roller Gap Control  In-process Wet Grinding  High Density Gaging  Hand Held Gages  X-Y Positional Feedback  Remote Monitoring  Applications where wiring must be minimized GC-485 SERIES Digital I/O Gage Heads SPECIFICATIONS  RS-485 output  ±0.1% of FR maximum (±0.05% typical) linearity  32 devices communicating over 2 wires  MIN, MAX and TIR readings  Velocity output  Internal tare (zero) function  Stroke ranges from ±0.