HF355 Datasheet | TE Connectivity

RF Signal Relays HF3 Relay n Y-Design n Frequency range DC to 3GHz n Impedance 50Ω or 75Ω n Small dimensions (14.6x7.2x10mm) n 1 form C contact (1 changeover contact) n Immersion cleanable n Low power consumption (≤140m W) Typical applications Cable modems and linecards/ CATV, Tabs, measurement and test equipment ATE, satellite / audio / video tuners, wireless base stations and antennas, switching boards Contact Data Contact arrangement Max. switching voltage Rated current Limiting continuous current, 23°C Switching power Max. continuos RF-power, 23°C Contact material Minimum switching voltage Initial contact resistance Operate time Release time without diode in parallel with diode in parallel Bounce time Duration of set/reset pulse min. Mechanical endurance 1 form C, 1 CO 220VDC, 250VAC 2A 2A 60W, 62.5VA, 50W (2.5GHz) 50W (2.5GHz) Ag, Au covered 100µV <100mΩ at 10m A, 30m V typ. 3ms, max. 5ms typ. 2ms, max. 5ms typ. 4ms, max. 6ms typ. 1ms, max. 3ms 20ms 107 operations Coil Data Coil voltage range 3 to 24VDC Coil versions, monostable Coil Rated Operate Limiting Release Coil Rated coil code voltage voltage voltage voltage resistance power VDC Ω±10% m W 50Ω version, monostable, 1 coil 3.75 10.90 4.50 13.00 6.75 19.60 9.00 26.10 18.00 52.30 75Ω version, monostable, 1 coil 3.75 10.90 4.50 13.00 6.75 19.60 9.00 26.10 18.00 52.30 All figures are given for coil without pre-energization, at ambient temperature +23°C. Coil Data (continued) Coil versions,...