PHA-0270B Datasheet | Teledyne Technologies

Description The PHA-0270B is a high performance silicon bipolar Monolithic Microwave Integrated Circuit (MMIC) housed in a hermetic high reliability 70 mil microstrip package. This MMIC is designed for use as a general purpose 50 Ω gain block. Typical applications include narrow and broad band IF and RF amplifiers in industrial and military applications. 706 is not the original device manufacturer. 706 procures mercial off the shelf product and Up Screens per the following process flow. For custom screening requirements, Quality Conformance Inspection, or additional electrical selection, please contact 706. 70 mil Package Dimensions 0.040 Gnd RF in 0.02 RF Out 0.004 ± 0.002 Gnd 0.070 0.495 ± 0.030 NOTES: (Unless otherwise specified) 1. Dimensions are in inches 2. Tolerances: X.XXX = ±0.005 Technical Data PHA-0270B Suggested Maximum Ratings Parameter Device Current RF Input Power Junction Temperature Storage Temperature Suggested Maximum [1] 60 m A +13 d Bm +200°C -65 to +200°C NOTE: 1. Permanent damage may occur if any of these limits are exceeded. Typical Biasing Configuration C block IN R bias Vcc > 7 V RFC C block Vd = 5 Avnet MTS (formerly PSElect), 6321 San Ignacio Ave., San Jose, CA 95119, Tel 1-408-360-4000, Fax 1-408-281-8802 Teledyne Microwave Solutions - 650-691-9800 - FAX: 650-962-6845 Specifications subject to change without notice. Symbol GP ∆GP Vd Electrical Specifications [1] Parameters and Test Conditions Power Gain (S212) f = 0.1 GHz Gain Flatness f = 0.1 to 1.8...