TLME3100 Datasheet | TEMIC Semiconductors

Description This device has been designed to meet the increasing demand for Al In Ga P technology. The package of the TLME3100 is the PL- CC- 2 (equivalent to a size B tantalum capacitor). It consists of a lead frame which is surrounded with a white thermoplast. The reflector inside this package is filled up with clear epoxy. Features D SMD LED with exceptional brightness D Luminous intensity categorized D patible with automatic placement equipment D EIA and ICE standard package D patible with infrared, vapor phase and wave solder processes according to CECC D Available in 8 mm tape D Low profile package D Non-diffused lens: excellent for coupling to light pipes and backlighting D Low power consumption x D Luminous intensity ratio in one packaging unit IVmax/IVmin 2.0 Applications Automotive: backlighting in dashboards and switches Telemunication: indicator and backlighting in telephone and fax Indicator and backlight for audio and video equipment Indicator and backlight in office equipment Flat backlight for LCDs, switches and symbols General use Angle of Half Intensity ±ö 60° 94 8553 Rev. A2: 20.10.1995 1 (6) Absolute Maximum Ratings Tamb = 25°C, unless otherwise specified TLME3100 Parameter Reverse voltage DC forward current Surge forward current Power dissipation Junction temperature Operating temperature range Storage temperature range Soldering temperature Thermal resistance junction/ambient Test Conditions Tamb ≤ 60°C x tp ≤ 10 ms Tamb 60°C t≤5s mounted on PC board (pad size > 16 mm2) TELEFUNKEN Semiconductors Symbol VR IF IFSM PV Tj Tamb Tstg Tsd Rth JA Value 5 30 0.1 80 100 - 40 to +100 - 55 to +100 260 400 Unit V m A A m W °C °C °C °C K/W Optical and Electrical Characteristics Tamb = 25°C, unless otherwise specified Yellow (TLME3100 ) Parameter Luminous intensity Dominant wavelength Peak wavelength Angle of half intensity Forward voltage Reverse voltage Junction capacitance Test Conditions IF = 10 m A IF = 10 m A IF = 10 m A IF = 10 m A IF = 20...