900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






TEMIC Semiconductors

TDA4455 Datasheet Preview

TDA4455 Datasheet

Multistandard VIF Amplifier and PLL Demodulator

No Preview Available !

TELEFUNKEN Semiconductors
TDA4455
Multistandard VIF Amplifier and PLL Demodulator
Application
Monolithic integrated circuit for vision IF signal processing in multistandard TV and VTR sets.
Description
This multistandard video IF processing circuit with PLL
picture carrier regeneration gives a high performance of
linear video demodulation.
With two IF inputs (Pins 1–2 and Pins 17–18), it is
possible to select between two signal sources. The input
selector switch (Pin 16) works independent from the
standard switch (Pin 11).
The IF signal is internally fed via a 3-stage controlled
wideband amplifier to the video demodulator and the
phase detector. The phase detector compares the phase of
IF signal (0°) with the output signal of the VCO (90°) and
sets the VCO frequency accordingly. A lock detector
switches the PLL loop filter according to the state of the
PLL (locked-PLL slow, unlocked-PLL fast).
A second output of the VCO (0°) provides the reference
carrier for the video demodulator. The polarity of the
demodulator can be inverted by the standard switch
(Pin 11), so that negative or positive modulated IF signals
are always available with the same polarity at the demo-
dulator output. The demodulated video signal is filtered,
amplified and fed via an interference limiter to the video
output (Pin 7).
The standard switch also determines the clamp level of
the video amplifier and the required IF-AGC mode. In the
standard B/G mode the sync peak value is the criterion for
a fast charge and discharge. In the standard L mode on the
other hand, fast AGC action is achieved by charging at
peak white level and discharging by the averaged video
signal (time constant on Pin 8). The response level for
discharge has a hysteresis. In the D2MAC mode a similar
function is applied to achieve the AGC, but with different
threshold levels.
An overload detector prevents the PLL becoming
unlocked by large IF input signals.
To achieve a delayed tuner-AGC action, the current out-
put (Pin 4) can be adjusted with a resistor at Pin 3.
Features
D Suitable for standard B/G, L and D2MAC, processes
negative and positive modulated IF-signals with equal
polarity of the output signal
D Two IF-inputs, for switching between two signal
sources (e.g., two tuners and two SAW-filters)
D High performance video demodulator with PLL
picture carrier regeneration
D Extended video bandwidth (12 MHz) for the demodu-
lation of amplitude modulated MAC-signals
D Standard B/G: AGC acting on the sync peak pulse
D Standard L: fast AGC acting on peak white level with
average value controlled capacitor discharge and
reference hysteresis
D D2MAC: fast AGC acting on peak level with
controlled capacitor discharge
D Output for delayed tuner-AGC, take over point
adjustable
D High input sensitivity
D Ultra white and ultra black limiting
D Supply voltage range 6.8 to 13 V
D Low power consumption
D ESD protection
Package Options
Case: 18-pin DIL plastic
Rev. A1: 08.05.1995
Preliminary Information
1 (12)




TEMIC Semiconductors

TDA4455 Datasheet Preview

TDA4455 Datasheet

Multistandard VIF Amplifier and PLL Demodulator

No Preview Available !

TDA4455
TELEFUNKEN Semiconductors
Block Diagram
Input
selector
switch
16
Loop filter
13
12 10
VCO Tank
9
11 Standard switch
17
IF Input 2
18
1
IF Input 1
2
4
Tuner AGC
Lock Video
detector
VCO
90°
0°
Overload
detector
+/–
B/G
L
D2MAC
RO
B/G
D2MAC
L
3
Tuner AGC
take over
6
IF AGC
58
Average
(only L, D2MAC)
93 7502
+
=
Interference
rejection
7
Video
output
15
VS
14 Int. Ref
Pin Description
Pin
1, 2
3
4
5, 14
6
7
8
Symbol
Function
IF input 1
Tuner AGC adjustment (turn
over point)
Delayed tuner AGC current
Ground
IF AGC time constant
Video output
Video averaging for standard L
and D2MAC
Pin
9, 10
11
12
13
15
16
17, 18
Symbol
Function
VCO circuit
Standard switch
PLL loop filter
PLL time constant switch
Supply voltage
Input selector switch
IF input 2
2 (12)
Preliminary Information
Rev. A1: 08.05.1995


Part Number TDA4455
Description Multistandard VIF Amplifier and PLL Demodulator
Maker TEMIC Semiconductors
PDF Download

TDA4455 Datasheet PDF





Similar Datasheet

1 TDA4452 Video IF Amplifier for Multistandard TV Receiver and VTR Appliances
TEMIC Semiconductors
2 TDA4453 Video IF Amplifier for Multistandard TV Receiver and VTR Appliances
TEMIC Semiconductors
3 TDA4454 Multistandard VIF Amplifier and PLL Demodulator
TEMIC Semiconductors
4 TDA4455 Multistandard VIF Amplifier and PLL Demodulator
TEMIC Semiconductors





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy