Datasheet4U Logo Datasheet4U.com

TK11234B - VOLTAGE REGULATOR

This page provides the datasheet information for the TK11234B, a member of the TK11213B VOLTAGE REGULATOR family.

Datasheet Summary

Description

The TK112xxB is a low dropout linear regulator with a builtin electronic switch.

The internal switch can be controlled by TTL or CMOS logic levels.

The device is in the ON state when the control pin is pulled to a logic high level.

Features

  • s High Voltage Precision at ± 2.0% s Active High On/Off Control s Very Low Dropout Voltage 80 mV at 30 mA s Very Low Noise s Very Small SOT-23L or SOT-89-5 Surface Mount Packages s Internal Thermal Shutdown s Short Circuit Protection.

📥 Download Datasheet

Datasheet preview – TK11234B

Datasheet Details

Part number TK11234B
Manufacturer TOKO
File Size 187.70 KB
Description VOLTAGE REGULATOR
Datasheet download datasheet TK11234B Datasheet
Additional preview pages of the TK11234B datasheet.

📁 Similar Datasheet

  • TK11250C - LDO Regulator (Toko America)
  • TK110A10PL - Silicon N-Channel MOSFET (Toshiba)
  • TK110A65Z - Silicon N-Channel MOSFET (Toshiba)
  • TK110E10PL - Silicon N-Channel MOSFET (Toshiba)
  • TK110E65Z - Silicon N-Channel MOSFET (Toshiba)
  • TK110N65Z - Silicon N-Channel MOSFET (Toshiba)
  • TK110P10PL - Silicon N-Channel MOSFET (Toshiba)
  • TK110U65Z - Silicon N-Channel MOSFET (Toshiba Semiconductor)
  • TK110Z65Z - Silicon N-Channel MOSFET (Toshiba)
  • TK11840 - DC/DC Controller (Asahi KASEI)
Other Datasheets by TOKO

Full PDF Text Transcription

Click to expand full text
TK112xxB VOLTAGE REGULATOR WITH ON/OFF SWITCH FEATURES s High Voltage Precision at ± 2.0% s Active High On/Off Control s Very Low Dropout Voltage 80 mV at 30 mA s Very Low Noise s Very Small SOT-23L or SOT-89-5 Surface Mount Packages s Internal Thermal Shutdown s Short Circuit Protection DESCRIPTION The TK112xxB is a low dropout linear regulator with a builtin electronic switch. The internal switch can be controlled by TTL or CMOS logic levels. The device is in the ON state when the control pin is pulled to a logic high level. An external capacitor can be connected to the noise bypass pin to lower the output noise level to 30 µVrms. An internal PNP pass transistor is used to achieve a low dropout voltage of 80 mV (typ.) at 30 mA load current.
Published: |