900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






TOKO

TK65917 Datasheet Preview

TK65917 Datasheet

SMALL EL LAMP DRIVER

No Preview Available !

TK6591x
SMALL EL LAMP DRIVER
FEATURES
s High Ratio of Brightness / Input Power
s Constant Brightness Versus Input Supply Changes
s Optimized for 3.5 nf to 12.5 nf Panel Capacitance
s Panel Voltage Slew Rates Controlled for Life
Enhancement
s Panel Peak to Peak Voltage Independent of Input
Voltage and Temperature
s Panel Peak to Peak Frequency Independent of
Input Voltage and Temperature
s Miniature Package (SOT23L-6)
s Operates with Miniature Coil
s Minimum External Components
s Laser-Trimmed Fixed Frequency Operation
s PWM Control Method
s Adjustable Output Voltage
s Lower Noise (Audio and EMI)
s Split Power Supply Application
DESCRIPTION
The TK6591x Electroluminescent (EL) Lamp Driver has
been optimized for battery controlled systems where power
consumption and size are primary concerns. The miniature
device size (SOT23L-6), together with the miniature Toko
EL coils (D32FU, D31FU, D52FU), further helps system
designers reduce the space required to drive the small EL
panels.
The proprietary architecture (detailed in the Theory of
Operation section) of the TK6591x provides a constant
output power to the lamp, independent of variations in the
battery voltage. This architecture allows the output voltage
to remain relatively constant as battery voltages decay,
without the need for directly sensing the high voltage
output of the EL driver.
ORDERING INFORMATION
TK6591 MTL
Lamp Frequency Code
APPLICATIONS
s Battery Powered Systems
s Cellular Telephones
s Pagers
s LCD Modules
s Wrist Watches
s Consumer Electronics
The oscillator circuits for the boost converter and lamp
driver are both internally generated in the TK6591x, without
the need for external components. The clock frequency of
the boost converter is laser-trimmed to ensure good initial
accuracy that is relatively insensitive to variations in
temperature and supply voltage. The clock frequency of
the lamp driver tracks the frequency of the boost converter
by a constant scaling factor.
Furthermore, the drive architecture of the TK6591x has
been designed to limit peak drive current delivered to the
lamp. This approach limits the slew rate of the voltage
across the lamp and has the potential to improve lamp life
and decrease RF interference.
The TK6591x is available in a miniature, 6 pin
SOT23L-6 surface mount package.
TK6591x
EL+ VCC
20P HV GND
EL- IND
BLOCK DIAGRAM
VCC
HV BOOST
CONTROL
OSCILLATOR
IND
GND
HV
LAMP FREQUENCY CODE
TK65910
175 Hz TK65915*
TK65911*
200 Hz TK65916
TK65912
225 Hz TK65917*
TK65913*
250 Hz TK65918
TK65914
275 Hz TK65919*
May 2000 TOKO, Inc.
300 Hz
325 Hz
350 Hz
375 Hz
400 Hz
TAPE/REEL CODE
TL: Tape Left
* Consult factory for availability
of other frequencies.
H
BRIDGE
EL+
EL-
Page 1




TOKO

TK65917 Datasheet Preview

TK65917 Datasheet

SMALL EL LAMP DRIVER

No Preview Available !

TK6591x
ABSOLUTE MAXIMUM RATINGS
VCC Pin .................................................................... 6.5 V
All Pins Except VCC and GND ............................... VCLAMP
Power Dissipation (Note 1) ................................ 600 mW
Storage Temperature Range ................... -55 to +150 °C
Operating Temperature Range ...................-30 to +80 °C
Junction Temperature ........................................... 150 °C
TK6591x ELECTRICAL CHARACTERISTICS
VCC = 3.6 V, TA = Tj = 25 °C, unless otherwise specified.
SYMBOL
PARAMETER
TEST CONDITIONS
MIN TYP MAX UNITS
V Input Supply Range
CC
2.7 3.6
6
V
IQ Quiescent Current
Current into pin 6
200 µA
IPEAK
Peak Current Threshold
26 32 38 mA
FLAMP
Lamp Frequency
See Table 1
Hz
F
BOOST
Boost Frequency
See Table 2
kHz
VCLAMP
Boost Clamp Voltage
Force 100 µA into HV pin
90 105 120 V
D(MAX)
Maximum Duty Cycle
88 92 96 %
VOUT
Peak to Peak Lamp Voltage
(Note 3)
125 140 155
V
I
CONV
Converter Supply Current
(Notes 2, 3)
See Table 3
mA
Note 1: Power dissipation is 600 mW when mounted as recommended (200 mW In Free Air). Derate at 4.8 mW/°C for operation above 25 °C.
Note 2: Converter supply current is dependent upon the DC resistance of inductor L1. Lower DC resistances will result in lower supply currents.
Note 3: When using test circuit below.
Gen. Note: Refer to “INDUCTOR VALUE SELECTION” and “INDUCTOR TYPE SELECTION” of Design Considerations Section for choosing
inductor.
Page 2
TEST CIRCUIT
CEL
5 nF
EL +
HV
EL -
C1
22 nF
D1
VCC
GND
IND
ICONV
VCC
L1
820 µH
Note: L1 = Toko Low Profile D32FU Series: 887FU-821 M
D1 = DIODES INC. DL4148
C1 = AVX 12061C223KAT2A
May 2000 TOKO, Inc.


Part Number TK65917
Description SMALL EL LAMP DRIVER
Maker TOKO
Total Page 20 Pages
PDF Download

TK65917 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 TK65910 SMALL EL LAMP DRIVER
TOKO
2 TK65911 SMALL EL LAMP DRIVER
TOKO
3 TK65912 SMALL EL LAMP DRIVER
TOKO
4 TK65913 SMALL EL LAMP DRIVER
TOKO
5 TK65914 SMALL EL LAMP DRIVER
TOKO
6 TK65915 SMALL EL LAMP DRIVER
TOKO
7 TK65916 SMALL EL LAMP DRIVER
TOKO
8 TK65917 SMALL EL LAMP DRIVER
TOKO
9 TK65918 SMALL EL LAMP DRIVER
TOKO





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy