ER104S
ER104S is SUPERFAST RECOVERY RECTIFIERS manufactured by TRSYS.
FEATURES l l l l l l l Superfast recovery times-epitaxial construction Low forward voltage, high current capability Exceeds environmental standards of MIL-S-19500/228 Hermetically sealed Low leakage High surge capability Plastic package has Underwriters Laboratories A-405
Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding pound
MECHANICAL DATA Case: Molded plastic, A-405 Terminals: Axial leads, solderable to per MIL-STD-202, Method 208 Polarity: Color Band denotes cathode end Mounting Position: Any Weight: 0.008 ounce, 0.22 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
ER100S ER101S ER101AS ER102S ER103S ER104S ER106S UNITS
Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Current .375"(9.5mm) lead lengths at TA=55
Peak Forward Surge Current, IFM (surge): 8.3ms single half sine-wave superimposed on rated load(JEDEC method)
50 35 50
100 70 100
150 105 150
200 140 200 1.0
300 210 300
400 320 400
600 420 600
30.0 .95 5.0 150 35.0 17 50 -55 to +150 1.25 1.7
Maximum Forward Voltage at 1.0A DC
Maximum DC Reverse Current at Rated DC Blocking Voltage Maximum DC Reverse Current at Rated DC Blocking Voltage TA=125 Maximum Reverse Recovery Time(Note 1) Typical Junction capacitance (Note 1) Typical Junction Resistance(Note 2) R JA Operating and Storage Temperature Range TJ
V A A ns
/W
NOTES: 1. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A
2. Measured at 1 MHz and applied reverse voltage of 4.0 VDC 3. Thermal resistance from junction to ambient and from junction to lead length 0.375”(9.5mm) P.C.B. mounted RATING AND CHARACTERISTIC CURVES ER100S THRU ER106S
Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
Fig. 2-MAXIMUM NON-REPETIVIE SURGE CURRENT
Fig. 3-MAXIMUM AVERAGE FORWARD CURRENT RATING Fig. 4-FORWARD CURRENT DERATING...
