OP145C Datasheet | TT Electronics

Features : - IR-transmissive plastic package - Side-looking package for space-limited applications - Wide irradiance pattern - Mechanically and spectrally matched to other OPTEK products Description : Each device in this series is a high intensity gallium arsenide infrared emitting diode that is suited for use as a PCBoard mounted slotted switch or an easy mount PCBoard interrupter. Each OP140 (A, B, C, D) and OP145C device is a domed-lens 935 nm diode that is molded in an IR-transmissive plastic sidelooking package. OP140 is mechanically and spectrally matched to the OP550 series of phototransistors and the OP560 series of photodarlingtons. OP145 is mechanically and spectrally matched to the OP555 and OP565 series devices. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data. Applications: - Space-limited applications - PCBoard mounted slotted switch - PCBoard interrupter Part Number OP140A OP140B OP140C OP140D OP145A (Obsolete) OP145C Ordering Information LED Peak Wavelength Lens Type Total Beam Angle Lead Length 935 nm Domed 40° min of 0.50" Ro HS General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 .ttelectronics. | sensors@ttelectronics. Rev C 05/2022 Page 1 Plastic Infrared Emitting Diode OP140 Series, OP145C Obsolete (OP145A) OP140 (A, B, C, D) DIMENSIONS ARE IN: [MILLIMETERS] INCHES Pin # 1 2 LED Cathode Anode Sensor Emitter/Anode Collector/Cathode...