OP165A Datasheet | TT Electronics

Features : - T-1 (3 mm) package style - Choice of narrow or wide irradiance pattern - Choice of dome lens or flat lens - Mechanically and spectrally matched to other OPTEK devices - Higher power output than Ga As at equivalent drive currents - 935 nm diode Description : Each device in the OP165 and OP166 series is a high intensity gallium arsenide infrared emitting diode (Ga As) that is molded in an IR transmissive clear epoxy package with either a dome or flat lens. Devices feature narrow and wide irradiance patterns and a variety of electrical characteristics. The small T-1 package style makes these devices ideal for space-limited applications. OP165 and OP166 devices are mechanically and spectrally matched to the OP505 and OP535 series devices. Please refer to Application Bulletins 208 and 210 for additional design information and reliability (degradation) data. Applications: - Space-limited applications - Applications requiring coupling efficiency - Battery-operated or voltage-limited applications Part Number OP165A OP165B OP165C OP165D OP165W OP166A OP166B OP166W (Obsolete) Ordering Information LED Peak Output Power (m W/cm2) IF (m A) Total Beam Wavelength Min / Max Typ / Max Angle 935 nm 1.95 / NA 1.40 / 2.20 0.85 / 1.60 0.28 / NA 0.50 / NA 1.95 / NA 1.40 / 2.20 18° 20 / 50 90° 18° 0.50 / NA 90° Lead Length 0.50" Ro HS General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323...