OPB735C Datasheet | TT Electronics

Features : - Choice of phototransistor or photodarlington output - Unfocused for sensing diffuse surfaces - Non-conductive plastic housing - Low profile to facilitate stacking - #28 AWG lead wire in 12” ( 300 mm) length Description : The OPB735 series sensors consist of an infrared light emitting diode and an NPN silicon phototransistor or photodarlington, encased side-by-side on converging optical axes in a black thermoplastic housing. The detector responds to light from the IRED only when a reflective object passes within its field of view. The OPB735 series employs hermetically sealed metal can packaged ponents. The OPB735X series has 4 leads . The OPB735XWZ series has interconnect wires at 12” (300 mm) length UL 1569 approved #28 AWG, stripped and tinned. Custom electrical, wire, cabling and connectors are available. Contact your local TT Electronics- OPTEK representative for more information. Applications: - Non-contact reflective object sensor - Assembly line automation - Machine automation - Machine safety - End of travel sensor - Door sensor - patible with Honeywell HOA1180 and HOA2498 Part Number OPB735A OPB735B OPB735C OPB735AWZ OPB735BWZ OPB735CWZ Ordering Information LED Peak Wavelength Sensor Nominal reflection distance Inch (mm) Transistor 890 nm Darlington Transistor 0.50” (12.7 mm) Darlington Lead Length/ Wire length 0.9” 12” / 28 AWG Wire General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323...