OPB750N Datasheet | TT Electronics

Features : - High contrast ratio (1,000 :1 minimum) - Low cost plastic housing - PCBoard mount (OPB750N, OPB750T) - 12” (305 mm) 26 AWG wires (OPB755TZ) - Available with no-mounting tabs “N” package - Available with two mounting tabs “T” package OPB750N OPB755TAZ OPB755TZ Description : Each sensor in the OPB750 and OPB755 series has a reflective assembly that features a Light Emitting Diode (LED) and phototransistor output designed to decrease low-level light, while not affecting the high-level light gain. The OPB750N and OPB750T devices are designed for PCBoard mounting with 0.40” (10 mm) length leads. OPB755TZ and OPB755TAZ assemblies are designed for remote mounting. The OPB755TZ has 12” (305 mm) UL rated wire, 26 AWG wire leads that terminate into an AMP # 3-640442-5 connector. The OPB755TAZ has 24” (610 mm) UL rated wire, 26 AWG leads. The OPB750T, OPB755TZ and OPB755TAZ have two mounting tabs while the OPB750N has no mounting tabs. Photologic® output versions are available with the OPB760 and OPB770 series. Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for more information. Ordering Information Applications: - Non-contact reflective object sensor - Assembly line automation - Machine automation - Machine safety - End of travel sensor - Door sensor Part Number OPB750N OPB750T LED Peak Wavelength Sensor Reflection Distance Inch 0.080" (2.03 mm) 890 nm Transistor & Rbe 0.150" (3.81 mm) 0.220" (5.59 mm) 0.080" (2.03 mm) 0.150" (3.81 mm) Lead Length 0.40" Tabs No tabs 2 tabs 0.220" (5.59 mm) OPB755NZ Obsolete OPB755TZ OPB755TAZ 890...