OPB829Z Overview
Each OPB827, OPB828 and OPB829 device consists of an infrared emitting diode (LED, 890 nm center wavelength) and a NPN silicon phototransistor, mounted on opposite sides of a 0.125” (3.18 mm) wide slot in a low-cost black plastic housing. A variety of aperture sizes are offered (see chart below). The OPB827 and OPB828 are designed fro PCBoard mounting with a minimum lead length of 0.35” (8.9 mm) while the OPB829Z...
OPB829Z Key Features
- 0.125” (3.18 mm) wide, 0.315” (8.00 mm) deep slot
- 0.305” (7.75 mm) lead spacing (OPB827)
- 0.220” (5.59 mm) lead spacing (OPB828)
- 24-inch 26 AWG wire leads (OPB829)
- Inexpensive plastic housing