OPB916 Datasheet | TT Electronics

OPB916 Series Features : - Low power consumption - Data rates to 250 k Baud - Choice of two logic states and two electrical outputs - 24” (610 mm) minimum 26 AWG UL listed wires - Slot width 0.20” (5.08 mm) - Slot Depth 0.635” (16.13 mm) Description: The OPB916 series of Photologic® photo integrated circuit switches provide optimum flexibility. Each switch consists of an infrared Light Emitting Diode (LED) and a Photologic® photo integrated circuit, mounted in an opaque housing with clear windows for dust protection. The deep slot allows for a longer reach of the optical path from the 0.650” (16.5 mm) mounting plane. Internal apertures are 0.010” x .060” (.25 mm x 1.52 mm) for the Photologic’s “S” side and 0.05” x 0.06” (1.27 mm x 1.52 mm) for the LED “E” side. Devices in this series exhibit stable performance over supply voltages ranging from 4.5 V to 16.0 V, and may be specified as buffered or inverted with an internal 10 kΩ pull-up resistor or open collector output. Devices are TTL/LSTTL patible and can drive up to 10 TTL loads. Custom electrical, wire or cabling are available. Contact your local representative or OPTEK for more information. Applications: - Mechanical switch replacement - Speed indication (tachometer) - Mechanical limit indication - Edge sensing Part Number OPB916BZ OPB916IZ OPB916BOCZ LED Peak Wavelength 880 nm Ordering Information Sensor Photologic® Slot Width / Depth 10K Pull-Up Inv-10K Pull-Up Open-Collector 0.200” / 0.635” Aperture Emitter / Sensor 0.05" / 0.01" Lead Length...