OPB962 Datasheet | TT Electronics

- Choice of logic and output driver circuits - Choice of aperture size, covered or open - Wire or PCB leads - Choice of mounting Features - Direct TTL, LSTTL, CMOS Interface The OPB960/ 970/ 980/ 990 series of non-contact Photologic® slotted optical switches provides flexibility in meeting application specific requirements for the design engineer. Building from a standard housing with a 0.125” (3.18mm) wide slot, the user can specify output logic state, output driver circuit, aperture width, aperture surface and mounting tab locations. Furthermore, an option of wire or PCB leads allows electrical interface flexibility. The device body is an opaque plastic which minimizes sensitivity to both visible and near-infrared external light sources which may impact operation. Aperture width choices provide different optical resolution for motion sensing. A covered aperture provides dust protection, while an open aperture provides maximum protection against external light sources. Electrical operation is over a wide supply voltage range. LED emissions are near-infrared (850- 940nm). Detector digital output logic choices of buffer or inverter with totem-pole or open-collector driver circuit simplify interface for various electrical requirements. Custom electrical, wire and cabling services are available. Contact your local representative or OPTEK for more information. pliant to EU Ro HS Directive 2002/95/EC - Speed and direction indication - Rotary encoders - Mechanical switch replacement - Printers - Top of form, End of travel, Home position. - Mechanical limit indication - Sliding Door Automotive and Lift gate applications Part Number Guide OPB 9XX X XX X OPTEK Assembly Photologic® Sensor Family Slot Aperture Surface and Lead Options: 6 - Covered (apertures not visible), PCB leads 7 - Open (apertures visible), PCB leads 8 - Covered (apertures not visible), Wires 9 - Open (apertures visible), Wires Logic and Output Driver Types: 0 - Buffer Totem-Pole 1 - Buffer...