OPF1414 Datasheet | TT Electronics

Features : - Low cost - High speed - No mounting hardware required - Wide temperature range - 100% LED burn-in (96 hours) - SMA or ST style ports - Wave solderable T-Package Description : The OPF1414 series fiber optic transmitters contain a high speed 840 nm Ga AIAs LED. This LED in conjunction with the package lensing is designed to efficiently couple light into multimode optical fibers ranging in size from 50/125 µm up to 200/230 µm. The high coupling efficiency of the LED and lensing allows the devices to be used at low current drive levels thus decreasing the power consumption and increasing system reliability. The consistency of coupling varies by less than 5 d B from part to part which reduces the dynamic range requirements of the receiver. The high power (-16.0 d Bm into 50/125 µm) OPF1414 was designed for small fiber applications or where there are large fixed losses such as in systems that contain star couplers or in line connectors. OPF1414T Pin # Description Pin # Description 1 No Connection 8 No Connection Anode Anode Cathode Anode 4 No Connection 5 No Connection Part Number OPF1414 OPF1414T Typ. d Bm into 50/125 µm @ 60 m A -12.0 -12.0 Typ. d Bm into 100/140 µm @ 60 m A -6.5 -6.5 Ro HS General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc TT Electronics | OPTEK Technology 2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200 .ttelectronics. | sensors@ttelectronics. Rev C 06/2022 Page 1 High Speed Fiber Optic Transmitter OPF1414, OPF1414T Obsolete (OPF1412T) Electrical...