OPF2416T Datasheet | TT Electronics

OPF2416, OPF2416T, OPF2416TC Features : - Up to 155Mbps operation - 850nm wavelength - ST style port - Wave solderable - Wide temperature range Description: The OPF2416 family is a low cost solution for high speed fiber optic munications designs. The internal lensing of this receiver’s design allows optimal response for fiber sizes of 100µm and below. The receiver is prised of a high speed, low noise, photodiode coupled to a transimpedance amplifier (TIA). The photodiode/TIA bination produces an output voltage that is proportional to the input light amplitude. This hybrid approach solves many of the problems of high speed data link designs by placing the photodiode close to the TIA. The amplification of the TIA makes the output much less susceptible to EMI. The output of the OPF2416 is an analog, low impedance, emitter follower voltage source. Subsequent circuitry can be utilized to convert the analog voltage to ECL/TTL for digital data rates up to 155 Mbps. The OPF2416 is available with either standard or threaded panel mount ST receptacles. The threaded version is also available in conductive plastic. Applications: - Industrial Ethernet equipment - Copper-to-fiber media conversion - Intra-system fiber optic links - Video surveillance systems “T” suffix = Threaded ST package “TC” suffix = Threaded, conductive ST package Ro HS ESD Class 2 ST is a registered trademark of AT&T. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc PIN FUNCTION 1 Not Connected 2 VOUT 3 VEE 4 Not Connected 5 Not Connected 6 VCC 7 VEE 8 Not Connected Pins 3 & 7 are electrically connected to the header. Pins 1,4,5 & 8 are mechanically connected together. OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 .optekinc. | .ttelectronics. Issue...