OPF347A Datasheet | TT Electronics

Features : - Low Cost 850 nm LED technology - Popular ST style receptacle - Pre-tested with fiber to assure performance - ponent pre-mounted and ready to use - Extended temperature range Description: The OPF347A fiber optic transmitters is a high performance device packaged for data munication links. This transmitter is an 850nm Ga Al As LED and is specifically designed to efficiently launch optical power into fibers ranging in size from 50/125µm up to 200/300µm diameter fiber. Multiple power ranges with upper and lower limits are offered which allows the designer to select a device best suited for the application. This product’s bination of Features including high speed and efficient coupled power makes it an ideal transmitter for integration into all types of data munications equipment. The mechanical design of this packaged is intended for PC Board or panel mounting. It is shipped with a lock washer, jam nut, 2 #2-56 screws, and a protective dust cap. Applications: - Industrial Ethernet equipment - Copper-to-fiber media conversion - Intra-system fiber optic links - Video surveillance systems Fiber Size 50/125 µm 62.5/125 µm 100/140 µm 200/300 µm Typical Coupled Power IF = 100m A, 25°C Type N.A. Graded Index Graded Index Graded Index Step Index OPF347A 25µW 45µW 125µW 475µW All Optek OPF LED emitters are AEL Class I as defined by IEC 60825-1 and are Risk Group 1 (Low-Risk) as de- Ro HS ESD Class 2 ST is a registered trademark of AT&T. fined by IEC 62471. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc TT Electronics | OPTEK Technology, Inc. 1645 Wallace Drive, Carrollton, TX 75006|Ph: +1 972 323 2200 sensors@ttelectronics. | .ttelectronics....