Datasheet4U Logo Datasheet4U.com

OPI1270 - Axial Fiber Optic Isolator

General Description

Each OPI1270 consists of a visible Red LED and a Phototransistor sensor, which are housed in separate opaque molded plastic housings and coupled by plastic fiber optic cable.

Key Features

  • Opaque plastic housings.
  • High noise immunity.
  • Visible Red LED with Phototransistor Output.
  • 0.05” (1.27 mm) lead spacing.
  • Data Transfer through plastic fiber optic cable.
  • Isolation voltage 15 kV dc (OPI1270-032), Longer versions higher.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
OPI1000L Optically Coupled Isolators Surface Mount Low Profile Bedford Opto Technology
OPI102 (OPI102 / OPI103) OPTICALLY COUPLED ISOLATORS OPTEK Technologies
OPI103 (OPI102 / OPI103) OPTICALLY COUPLED ISOLATORS OPTEK Technologies
OPI113 OPTICALLY COUPLED ISOLATORS ETC
OPI140 OPTICALLY COUPLED ISOLATOR OPTEK Technologies

Other Datasheets by TT Electronics

Part Number Description
OPI127 OPTICALLY COUPLED ISOLATOR
OPI127-032 Optically Coupled Isolator
OPI120 Optically Coupled Isolator
OPI120-032 Optically Coupled Isolator
OPI123 Optically Coupled Isolator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Axial Fiber Optic Isolator OPI1270 Series Features: • Opaque plastic housings • High noise immunity • Visible Red LED with Phototransistor Output • 0.05” (1.27 mm) lead spacing • Data Transfer through plastic fiber optic cable • Isolation voltage 15 kV dc (OPI1270-032), Longer versions higher Description: Each OPI1270 consists of a visible Red LED and a Phototransistor sensor, which are housed in separate opaque molded plastic housings and coupled by plastic fiber optic cable. The heavy-duty opaque housing shields the optical signal from dust, making this series of devices ideal for dust contaminated environments. The OPI1270 series are designed for applications that require high voltage isolation between input and output or signal communication over short distances.