900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






TT

OPI7320 Datasheet Preview

OPI7320 Datasheet

Optically Coupled Isolator

No Preview Available !

Optically Coupled Isolator
OPI7002, OPI7002RCE, OPI7010, OPI710RCE
OPI7320, OPI7320RCE, OPI7340, OPI7340RCE
Features:
± 6 kV electrical isolation
Inexpensive plastic housing
Choice of phototransistor or photodarlington output
UL registered File No. E8730*
Product Photo Here
Description:
Each OPI7002 and OPI7010 consists of an infrared emitting diode coupled to a NPN silicon phototransistor. The
LED and sensor are encased in a black, low-cost plastic housing. Pin spacing is compatible with standard dual-in-
line packages.
Each OPI7320 and OPI7340 consists of an infrared emitting diode coupled to a NPN silicon photodarlington. The
LED and sensor are encased in a high dielectric plastic housing. Pin spacing is compatible with standard dual-in-
line packages.
The RCE versions reverses the Phototransistor Emitter and Collector pin-out.
Custom electrical, wire and cabling and connectors are available. Contact your local representative or OPTEK for
more information.
Applications:
Requiring high voltage isolation
between input and output
Electrical isolation in dirty environments
Industrial equipment
Medical equipment
Office equipment
OPI7002, OPI7010
23
OPI7002RCE, OPI7010RCE
23
14
OPI7320, OPI7340
23
14
OPI7320RCE, OPI7340RCE
23
Part
Number
OPI7002
OPI7010
OPI7320
OPI7340
Ordering Information
LED
Peak
Wavelength
890 nm
Sensor
Transistor
Isolation
Voltage
(,000)
CTR
Min
IF (mA)
Typ / Max
20
6 10 / 50
100
890 nm or
935 nm
Darlington
6
200
5 / 50
400
VCE
(Volts)
Max
30
15
Lead
Length /
Spacing
0.30" /
0.30"
0.30" /
0.30"
Pin #
2
1
LED
Cathode
Anode
Pin # Transistor/ RCE
3 Collector / Emitter
4 Emitter / Collector
1 41 4
DIMENSIONS ARE IN:
[MILLIMETERS]
INCHES
RoHS
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com
Issue A.1 03/07
Page 1 of 3




TT

OPI7320 Datasheet Preview

OPI7320 Datasheet

Optically Coupled Isolator

No Preview Available !

Optically Coupled Isolator
OPI7002, OPI7002RCE, OPI7010, OPI710RCE
OPI7320, OPI7320RCE, OPI7340, OPI7340RCE
Absolute Maximum Ratings (TA = 25° C unless otherwise noted)
Operating Temperature Range
Storage Temperature Range
Input-to-Output Isolation Voltage(1)(2)
Lead Soldering Temperature [1/16 inch (1.6 mm) from the case for 5 seconds with soldering iron](3)
Input Diode
Forward DC Current
Peak Forward current (1 µs pulse width, 300 pps)
Reverse Voltage
Power Dissipation(3)
Output Phototransistor
Collector-Emitter Voltage
OPI7002, OPI7010, OPI7002RCE, OPI7010RCE
OPI7320, OPI7340, OPI7320RCE, OPI7340RCE
Emitter-Collector Voltage
Power Dissipation(3)
Notes:
(1) Measured with input leads and output leads shorted.
(2) RMA flux is recommended. Duration can be extended to 10 seconds maximum when flow soldering.
(3) Derate linearly 1.66 mW/° C above 25° C.
-40° C to +85° C
-40° C to +85° C
±6 kVDC
260° C
50 mA
3A
2V
100 mW
30 V
15 V
5.0 V
100 mW
OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible.
Issue A.1 03/07
Page 2 of 3
OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006
Phone: (972) 323-2200 or (800) 341-4747
FAX: (972) 323-2396 sensors@optekinc.com www.optekinc.com


Part Number OPI7320
Description Optically Coupled Isolator
Maker TT
PDF Download

OPI7320 Datasheet PDF






Similar Datasheet

1 OPI7320 Optically Coupled Isolator
TT





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy