TT5335D Datasheet | TT Electronics

2-wire Transmitter with HART Protocol Features : - RTD, TC, Ohm, and or m V input - Extremely high measurement accuracy - HART 5 protocol - Galvanic isolation - For DIN form B sensor head mounting Application: - Linearized temperature measurement with Pt100… Pt1000, Ni100… Ni1000, or TC sensor - Difference or average temperature measurement of 2 resistance or TC sensors - Conversion of linear resistance variation to a standard analog current signal, for instance from valves or Ohmic level sensors - Amplification of bipolar m V signals to standard 4...20 m A current signals - Connection of up to 15 transmitters to a digital 2-wire signal with HART munication Technical characteristics: - Within a few seconds the user can program TT5335D to measure temperatures within all ranges defined by the norms - The RTD and resistance inputs have cable pensation for 2-, 3-, and 4-wire connection - The TT5335D has been designed according to strict safety requirements and is therefore suitable for application in SIL 2 installations - Continuous check of vital stored data for safety reasons - Sensor error detection according to the guidelines in NAMUR NE89 Mounting / Installation - For DIN form B sensor head mounting Order: Type General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT electronics plc TT Electronics | Roxspur Measurement & Control 2 Downgate Drive, Sheffield, South Yorkshire, S4 8BT, UK |Ph: +44 (0) 114-244-2521 .ttelectronics. | Roxspur Sales@ttelectronics. Issue A 03/2019 Page...