RJ-032 Datasheet | Taimag

Features Fully shielded magnetics protect data from internally generated digital noise Reduces the overall length of the signal path for improved mon mode performance Implements full mon mode termination scheme with used and unused twisted pairs Meets IEEE802.3 Baseline Wander pensation specification Integrates high voltage capacitor to chassis ground Supports all major transceivers with matched turns ration and plete integration of specified termination DESIGNFOR 100 BASE-TX TRANSMISSION OVER UTP-5 CABLE OPERATING TEMP RANGE:-40 TO +85 STORAGE TEMP RANGE:-55 TO +125 PRIMARY OCL INDUCTANCE: 350u H MIN AT100KHz/0.1Vrms 8m A DC BIAS Typical Performance Characteristics Differential to Insertion Loss (d B MAX) Return Loss (d B Min @100Ω) mon Mode Rejection (d B MIN) MHz 0.3~100 -0.8 100~125 0.5~40 -1.2 -18 MHz 60 80 100 MHz 0.3~100 -35 20 MHz 40 60 80 100 MHz 0.3~100 -30 1500 Cross talk (d B MIN) CMRR (d B MIN) Isolation Voltage (Vrms min) -14.5 -12 -10 -47 -40 -37 -35 -33 Schematic: Design on MDI Interface Circuitry Taimag USA 55 Charles Drive Tewksbury Ma 01876 tel: 978.777.7725 fax: 978.777.4877 http://.Taimagusa. NUMBER:RD-SDRJ-032 DATE : 2003/04/08 -C(REV:1) Dimension: mm TOLERANCE: ±0.30 Ordering Information RJ45 - 032 Series NO. Taimag USA 55 Charles Drive Tewksbury Ma 01876 tel: 978.777.7725 fax: 978.777.4877 http://.Taimagusa. NUMBER:RD-SDRJ-032 DATE : 2003/04/08 -C(REV:1) Requirements 1.Design and Construction Product shall be of design, construction and physical dimensions specified on applicable product drawing. 2.Materials and Finish A. Contact: RJ Contact : Phosphor Bronze, Thickness=0.30mm Finish : (a) Contact Area : 30µ”min. Gold (b) Solder tail Area : 100µ”min. Tin/Lead(9:1) (c) Under plating : 50µ”min. Nickel over all RJ Joint Contact : Brass, Thickness=0.35mm Finish : 100µ”min. Tin/Lead(9:1) over 50µ”min. Nickel B. Plastic Part : (1) Set Housing : Thermoplastic, PBT, Black UL FILE NO. : E130155 Manufacturer : NAN YA PLASTICS CORP. Grade...