RGP20G Datasheet | Taiwan Semiconductor

RGP20A THRU RGP20M Features 2.0 AMPS. Glass Passivated Junction Fast Recovery Rectifiers Voltage Range 50 to 1000 Volts Current 2.0 Amperes DO-201 High temperature metallurgically bonded constructed Plastic material used carries Underwriters Laboratory Classification 94V-0 Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 2.0 amperes operation at TA=55o C with no thermal runaway Typical IR less than 0.2 u A High temperature soldering guaranteed: 350℃/10seconds/.375”(9.5mm) lead length at 5 lbs., 2.3 kg tension Mechanical Data Cases: JEDEC DO-201 molded plastic over glass body Lead: Plated Axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.03 ounce, 0.8 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol RGP RGP RGP RGP RGP 20A 20B 20D 20G 20J Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current .375” (9.5mm) Lead Length @TA = 55℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) VRRM VRMS VDC I(AV) IFSM 50 100 200 400 600 35 70 140 280 420 50 100 200 400 600 Maximum Instantaneous Forward Voltage @ 2.0A Maximum Full Load Reverse Current, Full Cycle Average 0.375”(9.3mm) Lead Length at TA=55o C Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ HTIR IR 5.0 200 Maximum Reverse Recovery Time ( Note 1 ) Trr 150...