TS393 Datasheet | Taiwan Semiconductor

DESCRIPTION The TS393 is dual independent precision voltage parators capable of single-supply or split-supply operation. The specifications as low as 2.0 m V make this device an excellent ground level with single-supply operation. Input offset-voltage selection for many applications in consumer automotive, and It is designed to permit a mon mode range-to- industrial electronics. FEATURES - Output voltage patible with DTL, ECL, TTL, MOS and CMOS Logic levels - Low input bias current 25n A - Low input offset current ±0.5n A - Low input offset voltage ±2m V (typ) - Input mon mode range to ground level - Differential input voltage range equal to power supply voltage - Very low supply current drain (0.4m A) - independent of supply voltage - Wide single-supply range 2V~36V - Split- supply range ±1V to ±18V DIP-8 SOP-8 Notes: Moisture sensitivity level: level 3. Per J-STD-020 TYPICAL APPLICATIN CIRCUIT Pin Definition: 1. Output A 2. Input A (-) 3. Input A (+) 4. GND 5. Input B (+) 6. Input B (-) 7. Output B 8. VCC Zero Crossing Detector (Single Supply) Document Number: DS_P0000198 Version: B15 Taiwan Semiconductor ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted) (Note 1) PARAMETER SYMBOL LIMIT Supply Voltage Differential Input Voltage Input mon Mode Voltage Range Input Current Output Short Circuit to Ground Output Sink Current VCC VIDR VICR IIN ISC ISINK +36 or ±18 36 -0.3 to 36 50 Continuous 20 Operating Temperature Range Junction Temperature Storage Temperature Range Lead Temperature 1.6mm (1/16”) from case for 10s. TOPR TJ TSTG TLEAD 0 ~ +70 150 -65 ~ +150 260 UNIT V V V m A m A °C °C °C °C ELECTRICAL CHARACTERISTICS (VCC = 5V, TA = 25°C unless otherwise noted) PARAMETER...