3-Terminal Fixed Positive Voltage Regulator
2. Ground (tab)
The TS7800 series voltage regulators are monolithic integrated circuits designed as fixed-voltage regulators for a
wide variety of applications including local, on-card regulation. These regulators employ internal current limiting,
thermal shutdown, and safe-area compensation. With adequate heatsink they can deliver output currents up to 1
ampere. Although designed primarily as a fixed voltage regulator, these devices can be used with external
components to obtain adjustable voltages and currents.
● Output Voltage Range 5 to 24V
● Output current up to 1A
● No external components required
● Internal thermal overload protection
● Internal short-circuit current limiting
● Output transistor safe-area compensation
● Output voltage offered in 4% tolerance
50pcs / Tube
50pcs / Tube
Note: Refer to detail ordering information table.
Standard Application Circuit
A common ground is required between the input and the
output voltages. The input voltage must remain typically
2.0V above the output voltage even during the low point on
the Input ripple voltage.
XX = these two digits of the type number indicate voltage.
* = Cin is required if regulator is located an appreciable
distance from power supply filter.
** = Co is not needed for stability; however, it does improve
Absolute Maximum Ratings (TA = 25oC unless otherwise noted)
IOUT Internal Limited
PD Internal Limited
Operating Junction Temperature
Storage Temperature Range
Thermal Resistance - Junction to Case
Thermal Resistance - Junction to Ambient
Note: Absolute maximum ratings are those values beyond which damage to the device may occur.
Functional operation under these conditions are not implied.
1/9 Version: E14