TS2507 Datasheet | Taiwan Semiconductor

Description The TS2507 integrates Pulse-Width-Modulation (PWM) control circuit into a single chip. These devise include a reference voltage source, oscillation circuit, error amplifier and etc. TS2507 provides low-ripple power, high efficiency, and excellent transient characteristics. The PWM control circuit is able to very the duty ratio linearly form 0 up to 100%. This controller also contains an error amplifier circuit as well as a soft-start circuit that prevents overshoot at startup. An enable function, an over current protect function and short circuit protect function are built inside, and when OCP or SCP happens, the operation frequency will be reduced. Also, an internal pensation block is built in to minimum external ponent count. With the addition of an external P-channel Power MOS, a coil, capacitors, and a diode connected externally, these ponents can function as step-down switching regulators. They serve as ideal power supply units for portable devices when coupled with the SOP-8, providing such outstanding features as low current consumption. Since this converter can acmodate an input Features - - - - - - - - - - Input Voltage: 3.6V~24V Output Voltage: 0.8V~Vcc Duty Ratio: 0%~100% PWM Control Oscillation Frequency: 330k Hz typ. Soft-Start (SS), Current Limit (CL), Enable Function Thermal Shutdown Function Short Circuit Protect (SCP) External SW P-Channel MOSFET Low ESR Output Capacitor Application SOP-8 Pb-Free Package Ordering Information Part No. TS2507CS RL Package SOP-8 Packing 2.5Kpcs / 13” Reel Application - - Simple High-efficiency Step down Regulator On-Card Switching Regulators Absolute Maximum Rating Parameter VCC Pin Voltage Feedback Pin Voltage ON/OFF Pin Voltage Switch Pin Voltage Power Dissipation Storage Temperature Range Operating Temperature Range Operating Supply Voltage Thermal Resistance from Junction to case Thermal Resistance from Junction to ambient Symbol VCC VFB VEN VSW PD TST TOP VOP θJC θJA 1/9 Rating - 0.3 to VSS...