MDO3000 Datasheet | Tektronix

features Fast Acq™ high-speed waveform capture rate finds elusive signal anomalies quickly Wave Inspector® Controls provide easy navigation and automated search of waveform data 33 automated measurements and waveform histograms for simplified waveform analysis Tek VPI® probe interface directly supports active, differential, and current probes for automatic scaling and units 9 in. (229 mm) WVGA widescreen color display Small footprint and lightweight - Only 5.8 in. (147 mm) deep and 9.2 lb. (4.2 kg) Spectral Analysis Dedicated front-panel controls for monly performed tasks Automated peak markers identify frequency and amplitude of spectrum peaks Manual markers enable non-peak measurements Trace types include: Normal, Average, Max Hold, and Min Hold Spectrogram display enables easy observation and insight into slowly changing RF phenomena Automated measurements include: Channel Power, Adjacent Channel Power Ratio (ACPR), and Occupied Bandwidth (OBW) Arbitrary Function Generation Generate predefined signals to quickly simulate missing devices in designs Capture signals on analog or digital inputs, transfer to the arbitrary edit memory, and replicate out from the AFG Add noise to any signal to easily perform margin testing .tektronix. 1 Mixed signal design and analysis Automated triggering, decode, and search on parallel buses Multichannel setup and hold...