B303P Datasheet | Thinki Semiconductor

Feature : Low leakage Low forward voltage drop High current capability High forward surge current capability Mechanical Data: Technology: Glass Passivation Pellet/Clip Bonding Case: Vacuum soldered/Sintered temperature < 260o C Polarity: As marked on body. (Note2) Lead: Plated lead, solderable per MIL-STD-202E method 208C Mounting: BLOCK/TO-230/BA/MR package type Application: Block Diode/Alternator Diode Stack Silicon Diffused Diode alternative Special for Car AC Alternator rectifier application TO-230/BLOCK/BA/MR Case Lead Positive Suffix:"P" MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS - Ratings at 25℃ ambient temperature unless otherwise specified - Single Phase, half wave, 60HZ, resistive or inductive load - For capacitive load derate current by 20% Unit:mm Case Lead Negative Suffix:"N" SYMBOLS Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current, At Tc=105℃ Peak Forward Surge Current 3.3m S single half sine wave superimposed on Rated load (JEDEC method) Rating for fusing (t＜8.3ms) Maximum instantaneous Forward Voltage at 100A Maximum DC Reverse Current at Rated TA=25℃ DC Blocking Voltage TA=100℃ VRRM VRMS VDC IFSM I2t VF IR Typical Thermal Resistance RθJC Operating and Storage Temperature Range TJ,TSTG Notes: 1. Enough heatsink must be considered in application. 2. Suffix "N" is for lead Negative.Suffix "P" is for lead...