FML22S thru FML26S
Pb Free Plating Product
10 Ampere Insulated Common Cathode Fast Recovery Half Bridge Rectifiers
Latest GPP technology with super fast recovery time
Low forward voltage drop
High current capability
Low reverse leakage current
High surge current capability
Automotive Inverters and Solar Inverters
Plating Power Supply,SMPS,EPS and UPS
Car Audio Amplifiers and Sound Device Systems
Case: Fully Isolated Molding TO-220FP
Epoxy: UL 94V-0 rate flame retardant
Terminals: Solderable per MIL-STD-202
Polarity: As marked on diode body
Mounting position: Any
Weight: 2.0 gram approximately
Common Cathode Common Anode Tandem Polarity Tandem Polarity
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified
Peak Forward Surge Current, 8.3ms single
Half sine-wave superimposed on rated load
Maximum Instantaneous Forward Voltage
@ 5.0 A
Maximum DC Reverse Current @TJ=25oC
At Rated DC Blocking Voltage @TJ=125oC
Maximum Reverse Recovery Time (Note 1)
Typical junction Capacitance (Note 2)
Typical Thermal Resistance (Note 3)
Operating Junction and Storage
-55 to +150
NOTES : (1) Reverse recovery test conditions IF = 0.5A, IR = 1.0A, Irr = 0.25A.
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC.
(3) Thermal Resistance junction to case.
© 1995 Thinki Semiconductor Co., Ltd.