U1620RG thru U1660RG
®
U1620RG thru U1660RG
Pb
Pb Free Plating Product
16 Ampere Surface Mount Common Anode Ultra Fast Recovery Rectifier
Feature
Fast switching for high efficiency
Low forward voltage drop
High current capability
Low reverse leakage current
High surge current capability
Application
Automotive Inverters/Solar Inverters
Plating Power Supply,Adaptor,SMPS and UPS
Car Audio Amplifiers and Sound Device System
D2PAK/TO-263
Unit : inch (mm)
Mechanical Data
Case:TO-263/D2PAK pkg case
Epoxy: UL 94V-0 rate flame retardant
Terminals: Solderable per MIL-STD-202
method 208
Polarity: As marked on diode body
Mounting position: Any
Weight: 2.0 gram approximately
Case
Positive
Common Cathode
Suffix "G"
Case
Negative
Common Anode
Suffix "RG"
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Case
Doubler
Tandem Polarity
Suffix "DG"
SYMBOL U1620RG U1640RG U1660RGUNIT
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified
Current TC=100oC
VRRM
VRMS
VDC
IF(AV)
200
140
200
400
280
400
16.0
Peak Forward Surge Current, 8.3ms single
Half sine-wave superimposed on rated load
(JEDEC method)
IFSM
175
150
Maximum Instantaneous Forward Voltage
@ 8.0 A
VF
0.98
1.3
Maximum DC Reverse Current @TJ=25oC
At Rated DC Blocking Voltage @TJ=125oC
IR
10.0
250
Maximum Reverse Recovery Time (Note 1) Trr
35
Typical junction Capacitance (Note 2)
CJ
90
Typical Thermal Resistance (Note 3)
R JC
2.2
Operating Junction and Storage
Temperature Range
TJ, TSTG
-55 to + 150
NOTES : (1) Reverse recovery test conditions IF= 0.5A, IR= 1.0A, Irr = 0.25A.
(2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC.
(3) Thermal Resistance junction to case.
600
420
600
1.7
V
V
V
A
A
V
uA
uA
nS
pF
oC/W
oC
Rev.05
© 2006 Thinki Semiconductor Co.,Ltd.
Page 1/2
http://www.thinkisemi.com/
