Datasheet4U Logo Datasheet4U.com

XC6227 - 700mA High Speed LDO Regulator

General Description

The XC6227 series is a highly accurate, low noise, high ripple rejection, low dropout, and low power consumption high speed voltage regulator.

Key Features

  • Maximum Output Current : 700mA Dropout Voltage Operating Voltage Range : 120mV @IOUT=300mA(VOUT=3.0V) : 1.7V ~ 6.0V Output Voltages Accuracy : 0.8V ~ 5.0V (0.05V increments) : ±1% (VOUT＞2.0V) ±0.02V (VOUT≦2.0V) Low Power Consumption : 100μA Chip Enable(CE) : Active High Standby Current below 0.1μA High Ripple Rejection : 65dB @ 1kHz Operating Ambient Temperature : -40℃ ~ 85℃ Low ESR Capacitor : Ceramic capacitor Packages : USP-6C, SOT-25, SOT-89-5 Environmentally Friendly : EU.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XC6206 100mA Low Dropout CMOS Voltage Regulators JinYu
XC6206 Linear voltage regulator UMW
XC6211 300mA High Speed LDO Regulators Torex
XC6218 Low Power Supply LDO Regulators TOREX
XC6238 300mA High Speed LDO Regulator Torex

Other Datasheets by Torex Semiconductor

Part Number Description
XC6220 1A LDO Voltage Regulator
XC6221 Low ESR Caps Compatible High Speed LDO Voltage Regulators
XC6222 700mA High Speed LDO Regulator
XC6223 300mA High Speed LDO Voltage Regulator
XC6224 150mA High Speed LDO Voltage Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
XC6227 Series 700mA High Speed LDO Regulator with Reverse Current Protection ETR03054-006 ■GENERAL DESCRIPTION The XC6227 series is a highly accurate, low noise, high ripple rejection, low dropout, and low power consumption high speed voltage regulator. The series consists of a voltage reference, an error amplifier, a driver transistor, a current limiter, a thermal protection circuit, a reverse current protection circuit and a phase compensation circuit. The CE function enables the entire circuit to be placed in a stand-by state by inputting a low level signal to the CE pin. Over-current protection and thermal protection circuits are integrated.