TA48025BF Datasheet | Toshiba

Features - Maximum output current: 1 A - Low output voltage : 1.5 / 1.8 / 2.5 / 3.3 / 5.0 / 8.0 / 9.0 V - Output voltage accuracy : VOUT ± 3% (@Tj = 25°C) Weight HSOP3-P-2.30D : 0.36 g (typ.) - Low standby current : 850 μA (typ.) (@IOUT = 0 A) - Low starting quiescent current - Low-dropout voltage : VD = 0.5 V (max) (@IOUT = 0.5 A) (1.1V only for TA48015BF) - COUT (reference) : 2.2 μF(multi-layer ceramic type) - Protection function : Overcurrent protection / overheating protection / SOA - Package type : Surface-mount New PW-Mold Pin Assignment Marking side 132 IN GND OUT The product(s) in this document (“Product”) contain functions intended to protect the Product from temporary small overloads such as minor short-term overcurrent or overheating. The protective functions do not necessarily protect Product under all circumstances. When incorporating Product into your system, please design the system (1) to avoid such overloads upon the Product, and (2) to shut down or otherwise relieve the Product of such overload conditions immediately upon occurrence. For details, please refer to the notes appearing below in this document and other documents referenced in this document. Start of mercial production 2008-10 2013-11-01 TA48015,018,025,033,05,08,09BF Marking TA48- - - BF Series Note: A line under a Lot No. identifies the indication of product Labels. [[G]]/Ro HS PATIBLE or [[G]]/Ro HS [[Pb]] 48- - - BF Product No. (or abbreviation code) Lot No. Note Please contact your TOSHIBA sales representative for details as to environmental matters such as the Ro HS patibility of Product. The Ro HS is the Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Note1: The “- - - ” part of each product number varies according to the output voltage of the product. How to Order Product...