TA48S05AF Datasheet | Toshiba

Features - Built-in ON/OFF control function (active high) - Maximum output current : 1 A - Low output voltage : 1.5 / 1.8 / 2.5 / 3.3 / 5.0 / 9.0 V - Output voltage accuracy : VOUT ± 3% (@Tj = 25°C) - Low quiescent current : 850 μA (typ.) (@IOUT = 0 A) (TA48S09AF : 900 μA (typ.)) - Low standby current (output OFF mode): 0.5 μA (typ.) - Low-dropout voltage : 0.5 V (max) (@VOUT ≥ 1.8 V, IOUT = 500 m A) - Protection function : Overcurrent protection /Thermal shutdown protection - Package type : Surface-mount 5-pin New PW-Mold Pin Assignment / Marking 48S- - - Part No. (or abbreviation code) Note 1 Lot No. Note 2 1 EN 2 IN 3 GND 4 OUT 5 NC Note 1: The “- - - ” in each product name is replaced with the output voltage of each product. Note 2: A line under a Lot No. identifies the indication of product Labels. Not underlined: [[Pb]]/INCLUDES > MCV Underlined: [[G]]/Ro HS PATIBLE or [[G]]/Ro HS [[Pb]] Please contact your TOSHIBA sales representative for details as to environmental matters such as the Ro HS patibility of Product. The Ro HS is the Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Start of mercial production 2005-11 2013-11-01 TA48S015,018,025,033,05,09AF The product(s) in this document (“Product”) contain functions intended to protect the Product from temporary small overloads such as minor short-term overcurrent or overheating. The protective functions do not necessarily protect Product under all circumstances. When incorporating Product into your system, please design the system (1) to avoid such overloads upon the Product, and (2) to shut down or otherwise relieve the Product of such overload conditions immediately upon occurrence. For details, please refer to the notes appearing below in this document and other documents referenced in this document. Pin Description Pin No. 1 2 3 4 5 Symbol EN...