Download the TA7733FG datasheet PDF.
This datasheet also covers the TA7733F variant, as both devices belong to the same functional bridge driver family and are provided as variant models within a single manufacturer datasheet.
General Description
Pin No.
Key Features
z Wide operating supply voltage range: VCC (opr. ) = 1.8~15 V
z Housed in a flat package (16-pin) z Forward and reverse rotation, stop and brake modes are
available by means of rotation control signals. z High efficiency is obtained z Can be used as an interface driver. Weight: 0.14 g (typ. )
Block Diagram
The TA7733FG is a Pb-free product. The following conditions apply to solderability:.
Full PDF Text Transcription for TA7733FG (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
TA7733FG. For precise diagrams, and layout, please refer to the original PDF.
TA7733F/FG TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA7733F/FG Functional Bridge Driver The TA7733 is a low-voltage bridge driver IC offering four mod...
View more extracted text
Driver The TA7733 is a low-voltage bridge driver IC offering four modes: forward rotation, reverse rotation, stop, and brake. Features z Wide operating supply voltage range: VCC (opr.) = 1.8~15 V z Housed in a flat package (16-pin) z Forward and reverse rotation, stop and brake modes are available by means of rotation control signals. z High efficiency is obtained z Can be used as an interface driver. Weight: 0.14 g (typ.) Block Diagram The TA7733FG is a Pb-free product. The following conditions apply to solderability: *Solderability 1. Use of Sn-37Pb solder bath *solder bath temperature = 230°C *dipping time = 5 seconds
TA7733FG Datasheet
