Download the TA8210AH datasheet PDF.
This datasheet also covers the TA8210 variant, as both devices belong to the same 20w btl x 2ch audio power amplifier family and are provided as variant models within a single manufacturer datasheet.
General Description
1.
This IC has the amplifier construction as shown in Fig.1.
The pre-amp (amp 1) is provided to the primary stage, and the input voltage is amplified by the flat amps, amp 3 and amp 4 of each channel through the phase amp.
Key Features
due to the temperature rise at the high output can also be reduced. This stereo audio power IC, designed for car audio use, has two built.
in channels to reduce the characteristic difference between L and R channels. In addition, the functions of stand.
by and muting, and a variety of protection circuits are involved. Features.
Low thermal resistance
: θj.
T = 1.5°C / W (infinite heat sink).
High power
: POUT (1) = 22W (typ. ) / channel (VCC = 14.4V, f = 1kHz,.
Full PDF Text Transcription for TA8210AH (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
TA8210AH. For precise diagrams, and layout, please refer to the original PDF.
TA8210AH / AL TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA8210AH,TA8210AL 20W BTL × 2ch Audio Power Amplifier The thermal resistance θj−T of TA8210AH, ...
View more extracted text
× 2ch Audio Power Amplifier The thermal resistance θj−T of TA8210AH, TA8210AL package designed for low thermal resistance, has a high efficiency of heat radiation. The temperature rise of chip can be reduced, and the influence from the degradation of the features due to the temperature rise at the high output can also be reduced. This stereo audio power IC, designed for car audio use, has two built−in channels to reduce the characteristic difference between L and R channels. In addition, the functions of stand−by and muting, and a variety of protection circuits are involved. Features · Low thermal resistance : θj−T = 1.5°
TA8210AH Datasheet
