Datasheet4U Logo Datasheet4U.com

TA8440F Datasheet DC MOTOR FULL BRIDGE DRIVER

Manufacturer: Toshiba

Datasheet Details

Part number TA8440F
Manufacturer Toshiba
File Size 189.52 KB
Description DC MOTOR FULL BRIDGE DRIVER
Datasheet download datasheet TA8440F Datasheet

General Description

ENABLE terminal Forward rotation / reverse rotation switch terminal BRAKE terminal Signal GND PWM signal input terminal Power voltage supply terminal for control Power voltage supply terminal for motor driver Output terminal Power GND COMMON terminal Power GND Output terminal TA8440F: 3, 6, 8, 10, 11, 12, 19, 20 pin is No Connection.

FUNCTION INPUT IN BRAKE ENABLE CHOP HHH L L HHL (*) (*) L (*) (*) L H (*) HHHH L HHH * : Don’t care ∞: High impedance OUTPUT OUTA OUT A HL LH ∞∞ LL ∞L L∞ MAXIMUM RATING (Ta = 25°C) CHARACTERISTIC Supply Voltage Input Voltage Output Current AVE PEAK Power Dissipation Operating Temperature Storage Temperature Note 1: t = 100 ms Note 2: No heat sink Note 3: Tc = 75°C SYMBOL VCC VS

Overview

TA8440H/F TOSHIBA BIPOLAR LINEAR INTEGRATED CIRCUIT SILICON MONOLITHIC TA8440H,TA8440F DC MOTOR FULL BRIDGE DRIVER F TYPE: UNDER DEVELOPMENT The TA8440H is a full−bridge driver for selecting the forward and reverse running of a motor with brushes and is able to control 4 modes of forward, reverse, stop and braking.

The motor driving unit and the control unit have a separate power supply line, independently and the TA8440H is also usable as a stepping motor driver.

Key Features

  • l Output current is as large as 1.5A (AVE) and 3.0A (PEAK). l 4 modes of forward, reverse, stop, and braking are available and a counter.
  • electromotive force absorbing diode has been built.
  • in. l Thermal shutdown circuit incorporated. l Input is compatible with CMOS. l Built.
  • in input pull.
  • up resistor. BRAKE = 200 kΩ (Typ. ) l Built.
  • in input pull.
  • down resistor. IN, ENABLE = 100 kΩ (Typ. ) TA8440F (Under development) BLOCK.