TB62212FNG
Features
- Single-chip motor driver for bipolar stepping motor control
HTSSOP48-P-300-0.50
- Monolithic IC structured by Bi CD process.
Weight: 0.21 g (typ.)
- Low ON-resistance: Ron = 2.2 (Upper and lower sum of P- and N-channel output transistors: Tj = 25 @0.6 A (typ.))
In large mode, ON-resistance of bined H-bridges is: Ron = 1.1 (Upper and lower sum of P and N channel output transistors: Tj = 25 @0.6 A (typ.))
- Over-current detection (ISD), thermal shutdown (TSD) and VM power-on reset circuits
- Since the IC incorporates a VCC regulator for internal circuit operation, an external power supply (5 V) is not required.
- Package: Surface mount package with a backside heat sink: 0.5mm lead pitch)
- Maximum output voltage:40 V
- Output current: 2.0 A (max) in DC (S) mode:1.5 A (max) in Stepping (S) mode
- Chopping frequency can be set by external capacitor. High-speed chopping is possible at 100 k Hz or higher.
Note) This product is sensitive to electrostatic discharge. Please...
