Datasheet4U Logo Datasheet4U.com

TB6561FG - Dual Full-Bridge Driver IC

General Description

Pin No.

Connect a capacitor (0.1 μF) between this pin and S-GND pin.

High: Start, Low: Standby, Built in pull-down resistance (100 kΩ (typ.)).

Key Features

  • Power supply voltage: 40 V (max).
  • Output current: 1.5 A (max).
  • Low ON-resistance: 1.5 Ω (upper and lower transistors/typ. ).
  • Direct PWM current control system.
  • Power-saving function.
  • Forward/reverse/short brake/stop modes.
  • Over-current protection: ILIM = 2.5 A (typ. ).
  • Thermal shutdown.
  • Package: SSOP30-P-375-1.00 SSOP30-P-375-1.00 Weight: 0.63g (typ. ) The following conditions apply to solderability: About solderabi.

📥 Download Datasheet

Datasheet Details

Part number TB6561FG
Manufacturer Toshiba
File Size 234.60 KB
Description Dual Full-Bridge Driver IC
Datasheet download datasheet TB6561FG Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TB6560-3N the Stepper Motor Driver Board User Manual ETC
TB6560FG PWM Chopper-Type bipolar Stepping Motor Driver Toshiba Semiconductor
TB6560HQ PWM Chopper-Type bipolar Stepping Motor Driver Toshiba Semiconductor
TB6562ANG Dual Full-Bridge Driver Toshiba Semiconductor
TB6568KQ Full-Bridge DC Motor Driver Toshiba Semiconductor

Other Datasheets by Toshiba

Part Number Description
TB6561NG Dual Full-Bridge Driver
TB6560AFG PWM Chopper-Type Bipolar Driver
TB6560AFTG PWM Chopper-Type Bipolar Driver IC
TB6560AHQ PWM Chopper-Type Bipolar Driver
TB6562AFG Dual Full-Bridge Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TOSHIBA Bi-CMOS Integrated Circuit Silicon Monolithic TB6561FG TB6561FG Dual Full-Bridge Driver IC for DC Motors The TB6561FG is a dual bridge driver IC for DC brush motor that contains MOS transistors in an output stage. By using low ON-resistance MOS transistors and PWM current control circuitry, the driver achieves high efficiency. TB6561FG Features • Power supply voltage: 40 V (max) • Output current: 1.5 A (max) • Low ON-resistance: 1.5 Ω (upper and lower transistors/typ.) • Direct PWM current control system • Power-saving function • Forward/reverse/short brake/stop modes • Over-current protection: ILIM = 2.5 A (typ.) • Thermal shutdown • Package: SSOP30-P-375-1.00 SSOP30-P-375-1.00 Weight: 0.63g (typ.