Datasheet4U Logo Datasheet4U.com

TB7102F - Buck DC-DC Converter

General Description

Pin No.

SGND N.C.

N.C.

Key Features

  • Enables up to 1 A of load current (IOUT) with a minimum of external components.
  • High efficiency (η = 95% typ. ) (@VIN = 5 V, VOUT = 3.3 V and IOUT = 300 mA) Weight: 0.017 g (typ. ).
  • Operating voltage (VIN) range: 2.7 V to 5.5 V.
  • A high 1-MHz oscillation frequency (typ. ) allows the use of small external components.
  • Uses internal phase compensation to achieve high efficiency with a minimum of external components.
  • Allows the use of a sm.

📥 Download Datasheet

Datasheet Details

Part number TB7102F
Manufacturer Toshiba
File Size 282.14 KB
Description Buck DC-DC Converter
Datasheet download datasheet TB7102F Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TB7.5A4V Current Transducers Topstek
TB731P IN-DASH WIDE COLOR LCD TV Manual clarion
TB732P IN-DASH WIDE COLOR LCD TV Manual clarion
TB733W IN-DASH WIDE COLOR LCD TV Manual clarion
TB77 Low Voltage Detectors Top-Best

Other Datasheets by Toshiba

Part Number Description
TB7102AF Buck DC-DC Converter
TB7101F Buck DC-DC Converter
TB7106F Buck DC-DC Converter
TB7107FN Buck DC-DC Converter
TB7109F Power supply IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Toshiba BiCD Integrated Circuit Silicon Monolithic TB7102F Buck DC-DC Converter IC TB7102F The TB7102F is a single-chip buck DC-DC converter IC. The TB7102F contains high-speed and low-on-resistance power MOSFETs for the main switch and synchronous rectifier to achieve high efficiency. Features • Enables up to 1 A of load current (IOUT) with a minimum of external components. • High efficiency (η = 95% typ.) (@VIN = 5 V, VOUT = 3.3 V and IOUT = 300 mA) Weight: 0.017 g (typ.) • Operating voltage (VIN) range: 2.7 V to 5.5 V • A high 1-MHz oscillation frequency (typ.) allows the use of small external components. • Uses internal phase compensation to achieve high efficiency with a minimum of external components.