Datasheet4U Logo Datasheet4U.com

TC74VCXH16827FT - Low-Voltage 20-Bit Bus Buffer

Features

  • Low-voltage operation: VCC = 1.8 to 3.6 V.
  • Bushold on data inputs eliminating the need for external pull-up/pull-down resistors.
  • High-speed operation: tpd = 2.5 ns (max) (VCC = 3.0 to 3.6 V) : tpd = 3.0 ns (max) (VCC = 2.3 to 2.7 V) : tpd = 6.0 ns (max) (VCC = 1.8 V).
  • Output current: IOH/IOL = ±24 mA (min) (VCC = 3.0 V) : IOH/IOL = ±18 mA (min) (VCC = 2.3 V) : IOH/IOL = ±6 mA (min) (VCC = 1.8 V).
  • Latch-up performance:.
  • 300 mA.
  • ESD pe.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TC74VCX2125FK Low-Voltage Quad Bus Buffer Toshiba Semiconductor
TC74VCX2573FK Low-Voltage Octal D-Type Latch Toshiba Semiconductor
TC74VCX2573FT Low-Voltage Octal D-Type Latch Toshiba Semiconductor
TC74VHC03F Quad 2-Input NAND Gate Toshiba Semiconductor
TC74VHC03FK Quad 2-Input NAND Gate Toshiba Semiconductor

Other Datasheets by Toshiba

Part Number Description
TC74VCXH162244FT Low-Voltage 16-Bit Bus Buffer
TC74VCXH162373FT Low-Voltage 16-Bit D-Type Latch
TC74VCXH162374FT Low-Voltage 16-Bit D-Type Flip-Flop
TC74VCXH16244FT Low-Voltage 16-Bit Bus Buffer
TC74VCXH16245 Low-Voltage 16-Bit Bus Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TC74VCXH16827FT TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC74VCXH16827FT Low-Voltage 20-Bit Bus Buffer with Bushold The TC74VCXH16827FT is a high-performance CMOS 20-bit bus buffer. Designed for use in 1.8-V, 2.5-V or 3.3-V systems, it achieves high-speed operation while maintaining the CMOS low power dissipation. The TC74VCXH16827FT is composed of two 10-bit sections with separate output-enable signals. For either 10-bit buffer section, the two output-enable (1OE1and 1OE2 or 2OE1 and 2OE2) inputs must both be low for the corresponding Y outputs to be active. When the OE input is high, the outputs are in a high-impedance state. This device is designed to be used with 3-state memory address drivers, etc. Weight: 0.25 g (typ.
Published: |