Absolute Maximum Ratings
Differential input voltage(1)
±2.3 or 4.6
VSS to VDD
−40 to 85
−55 to 125
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note: Since this product sometimes brings about latch-up, which is peculiar to CMOS devices, note the following
• Don’t raise the voltage level of the output pins beyond VDD, nor lower it below VSS.
Consider the timing for power supply, too.
• Don’t let any abnormal noise enter the device.
Note 1: Mounted on an FR4 board.
Operating Ranges (Ta = 25°C)
1.5 to 4.6
±0.75 to ±2.3