5. IEC Logic Symbol
TC7SET14FU
6. Truth Table
A
Y
L
H
H
L
7. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25 )
Characteristics
Symbol
Note
Rating
Unit
Supply voltage
VCC
-0.5 to 7.0
V
Input voltage
VIN
-0.5 to 7.0
DC output voltage
VOUT
-0.5 to VCC + 0.5
Input diode current
IIK
-20
mA
Output diode current
IOK
(Note 1)
±20
DC output current
IOUT
±25
VCC/ground current
ICC
±50
Power dissipation
PD
200
mW
Storage temperature
Tstg
-65 to 150
Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even
destruction.
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Note 1: VOUT < GND, VOUT > VCC
8. Operating Ranges (Note)
Characteristics
Symbol
Note
Rating
Unit
Supply voltage
Input voltage
Output voltage
Operating temperature
VCC
4.5 to 5.5
V
VIN
0 to 5.5
VOUT
0 to VCC
Topr
(Note 1)
-40 to 125
(Note 2)
-40 to 85
Note: The operating ranges must be maintained to ensure the normal operation of the device.
Unused inputs must be tied to either VCC or GND.
Note 1: For devices with the ordering part number ending in J(CT.
Note 2: For devices except those with the ordering part number ending in J(CT.
©2016 Toshiba Corporation
2
2017-05-16
Rev.3.0