5. IEC Logic Symbol
6. Truth Table
7. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta = 25 )
-0.5 to 6.0
-0.5 to 6.0
DC output voltage
-0.5 to VCC + 0.5
Input diode current
Output diode current
DC output current
-65 to 150
Note: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even
Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
Note 1: VOUT < GND, VOUT > VCC
8. Operating Ranges (Note)
1.65 to 5.5
1.5 to 5.5
0 to 5.5
0 to VCC
-40 to 125
-40 to 85
Note: The operating ranges must be maintained to ensure the normal operation of the device.
Unused inputs must be tied to either VCC or GND.
Note 1: Data retention only
Note 2: For devices with the ordering part number ending in J(T.
Note 3: For devices except those with the ordering part number ending in J(T.
Toshiba Electronic Devices & Storage Corporation