TC90175XBG Datasheet | Toshiba

CMOS Digital Integrated Circuit Silicon Monolithic Video signal processing IC Summary TC90175XBG Overview TC90175XBG is a video signal LSI for the Full-HD input and output. This device receives an analog video signal (CVBS) or a digital video signal (LVTTL / LVDS), executes the video signal processing (scaling function, and picture improvement feature), and outputs a digital signal (LVTTL / LVDS). P-LFBGA293-1717-0.80-001 Application Weight 0.665g (Typ.) This device is used for the equipument implementing a panel which displays a multiple image systems, such as a car navigation system, a display audio system, and others. Features - Analog video signal (CVBS) input ‒ 10bit ADC 1ch, 2-in / 1-out selector switch ‒ Pre-filter (LPF) ‒ 3line-Y / C sepalation ‒ Color decorder for multi color system - Digital video signal input ‒ LVTTL 1ch 85MHz (max), YUV = 4:2:2 or RGB = 4:4:4 ‒ LVDS (Single 2ch or Dual 1ch) 100MHz (max)@Singel-Link, YUV = 4:4:4/4:2:2 or RGB = 4:4:4 (e.g. 1920x720@60fps) 150MHz (max)@Dual-Link, YUV = 4:4:4/4:2:2 or RGB = 4:4:4 (e.g. 1920x1080@60fps) - Scaling function ‒ Up / Down scaling ‒ Horizontal averration correction ‒ Trapezoid correction ‒ Nonliner horizontal scaling - YUV signal process ‒ Edge correction (HVD-Enhancer / NC, Sharpness, CTI) ‒ Static / Dynamic YC-gamma correction ‒ Area-adaptive dynamic YC-gamma correction ‒ Color management ‒ TINT adjustment ‒ Contrast adjustment, Brightness adjustment ‒ Color gain adjustment, Color offset adjustment - RGB signal process ‒ Offset / Gain adustment ‒ Ganmma correction ‒ Dither process - Built-in OSD function ‒ Font OSD display ‒ Line drawing - Digital video signal output ‒ LVTTL 1 ch 80MHz (max), YUV = 4:2:2 or RGB = 4:4:4 T-con signal output (Case of RGB18bit output) ‒ LVDS (Single 2ch or Dual 1ch) 100MHz (max)@Singel-Link, YUV = 4:4:4/4:2:2 or RGB = 4:4:4 (e.g. 1920x720@60fps) 150MHz (max)@Dual-Link, YUV = 4:4:4/4:2:2 or RGB=4:4:4 (e.g. 1920x1080@60fps) ‒ PWM signal output (2...