TD62002AP Datasheet | Toshiba

ure integral clamp diodes for switching inductive loads. Applications include relay, hammer, lamp and display (LED) drivers. Features l Output current (single output) 500 m A MAX. l High sustaining voltage output 35 V MIN. (TD62001P / F Series) 50 V MIN. (TD62001AP / AF Series) l Output clamp diodes l Inputs patible with various types of logic l Package Type- P, AP : DIP- 16 pin l Package Type- F, AF : SOP- 16 pin TYPE TD62001P / AP / F / AF TD62002P / AP / F / AF TD62003P / AP / F / AF TD62004P / AP / F / AF INPUT BASE RESISTOR External 10.5- kΩ + 7 V Zenner diode 2.7 kΩ 10.5 kΩ DESIGNATION General Purpose 14~25 V PMOS TTL, 5 V CMOS 6~15 V PMOS, CMOS Weight DIP16- P- 300- 2.54A : 1.11 g (Typ.) SOP16- P- 225- 1.27 : 0.16 g (Typ.) PIN CONNECTION (TOP VIEW) 2001-06-27 TD62001~004P/AP/F/AF SCHEMATICS (EACH DRIVER) TD62001P / AP / F / AF TD62002P / AP / F / AF TD62003P / AP / F / AF TD62004P / AP / F / AF Note: The input and output parasitic diodes cannot be used as clamp diodes. MAXIMUM RATINGS (Ta = 25°C) CHARACTERISTIC Output Sustaining Voltage Output Current Input Voltage Input Current Clamp Diode Reverse Voltage Clamp Diode Forward Current P Power Dissipation AP F, AF Operating Temperature Storage Temperature P AP, F, AF Topr Tstg PD P, F AP, AF P, F AP, AF SYMBOL VCE (SUS) IOUT VIN (Note 1) IIN (Note 2) VR IF RATING - 0.5~35 - 0.5~50 500 - 0.5~30 25 35 50 500 1.0 1.47 0.54 / 0.625 (Note 3) - 30~75 - 40~85 - 55~150 °C °C W UNIT V m A / ch V m A V m A Note 1: Except TD62001P / AP / F / AF Note 2: Only TD62001P / AP / F / AF Note 3: On glass epoxy PCB (30 × 30 × 1.6 mm Cu 50%) 2001-06-27 TD62001~004P/AP/F/AF REMENDED OPERATING CONDITIONS CHARACTERISTIC Output Sustaining Voltage P, F AP, AF AP Tpw = 25 ms 7 Circuits Ta = 85°C Tj = 120°C SYMBOL VCE (SUS) Duty = 10% Duty = 50% IOUT Duty = 10% Duty = 50% Duty = 10% Duty = 50% VIN (Ta = - 40~85°C and Ta = - 30~75°C for only Type- P) CONDITION MIN 0 0 0 0 0 0 0 0 0 14.5 VIN (ON) IOUT = 400 m A h FE = 800 2.8 6.2 0 VIN (OFF) 0 0...