900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Toshiba Electronic Components Datasheet

TLP2210 Datasheet

Photocoupler

No Preview Available !

Photocouplers Infrared LED & Photo IC
TLP2210
TLP2210
1. Applications
• Programmable Logic Controllers (PLCs)
• Solar Micro-Inverters
• I/O Interface Boards
2. General
The TLP2210 consists of a high-output infrared LED coupled with a high-speed photodetectors. It is housed in
a thin SO8L package of 2.35 mm (max). The SO8L package keeps 5000 Vrms isolation voltage and compliant
with international safety standards for reinforced insulation. It has two circuits built into a single SO8L package,
which contributes to reduce the mounting area.
This product guarantees operation at up to 125 and on supplies from 2.7 V to 5.5 V. The low supply current
(IDDL/IDDH) of 0.6 mA, and the low threshold input current (IFLH) of 1.3 mA (Ta = 125 ) provides energy saving
of sets, and enables TLP2210 to be driven from a microcomputer directly.
The TLP2210 has an internal Faraday shield that provides a guaranteed common-mode transient immunity of
±25 kV/µs.
3. Features
(1) Buffer logic type (totem pole output)
(2) Package: SO8L(LF4)
(3) Operating temperature: -40 to 125
(4) Supply voltage: 2.7 to 5.5 V
(5) Data transfer rate: 5 Mbps (typ.)
(6) Threshold input current: 1.3 mA (max)
(7) Supply current: 0.6 mA (max)
(8) Common-mode transient immunity: ±25 kV/µs (min)
(9) Isolation voltage: 5000 Vrms (min)
(10) Safety standards
UL-recognized: UL 1577, File No.E67349
cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349
VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1)
CQC-approved: GB4943.1, GB8898 Japan Factory (Pending)
Note 1: When a VDE approved type is needed, please designate the Option (D4).
©2019-2020
Toshiba Electronic Devices & Storage Corporation
1
Start of commercial production
2020-01
2020-01-17
Rev.1.0


Toshiba Electronic Components Datasheet

TLP2210 Datasheet

Photocoupler

No Preview Available !

4. Packaging and Pin Assignment
11-6B1A
5. Internal Circuit (Note)
TLP2210
1: Anode 1
2: Cathode 1
3: Cathode 2
4: Anode 2
5: GND
6: VO 2 (output 2)
7: VO 1 (output 1)
8: VDD
Note: A 0.1-µF bypass capacitor must be connected between pin 8 and pin 5.
6. Principle of Operation
6.1. Truth Table
Input
H
L
LED1 (2)
ON
OFF
M1 (3)
ON
OFF
6.2. Mechanical Parameters
M2 (4)
OFF
ON
Output 1 (2)
H
L
Characteristics
Creepage distances
Clearance
Internal isolation thickness
Min
Unit
8.0
mm
8.0
0.4
©2019-2020
Toshiba Electronic Devices & Storage Corporation
2
2020-01-17
Rev.1.0


Part Number TLP2210
Description Photocoupler
Maker Toshiba
PDF Download

TLP2210 Datasheet PDF






Similar Datasheet

1 TLP2210 Photocoupler
Toshiba
2 TLP221A Photocouplers Photorelay
Toshiba
3 TLP221AF Photocoupler Photorelay
Toshiba





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy