900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Toshiba Electronic Components Datasheet

TLP2348 Datasheet

Photocoupler

No Preview Available !

Photocouplers Infrared LED & Photo IC
TLP2348
TLP2348
1. Applications
• Intelligent Power Module Signal Isolation
• Programmable Logic Controllers (PLCs)
• High-Speed Digital Interfacing for Instrumentation and Control Devices
2. General
The Toshiba TLP2348 consists of high-output an Infrared LED coupled with a high-gain, high-speed photo
detector. It is housed in the SO6 package. This product can operate in power supply voltage 4.5 V to 30 V with
the maximum operative temperature of 110 . Since TLP2348 has guaranteed 3 mA low supply current (ICCL/
ICCH), and 1.6 mA low threshold input current (IFHL), it contributes to energy saving of devices. It can drive
directly from a microcomputer for a low input current. The detector has a totem-pole output stage with current
sourcing and sinking capabilities. The TLP2348 has an internal Faraday shield that provides a guaranteed
common-mode transient immunity of ±30 kV/µs. The TLP2348 has an inverter output. A buffer output version,
the TLP2345, is also available.
3. Features
(1) Inverter logic type (Totem pole output)
(2) Package: SO6
(3) Operating temperature: -40 to 110
(4) Supply voltage: 4.5 to 30 V
(5) Threshold input current: 1.6 mA (max)
(6) Supply current: 3 mA (max)
(7) Propagation delay time: 120 ns (max)
(8) Pulse width distortion: 40 ns (max)
(9) Common-mode transient immunity: ±30 kV/µs (min)
(10) Isolation voltage: 3750 Vrms (min)
(11) Safety standards
UL-recognized: UL 1577, File No.E67349
cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349
VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1)
Note 1: When a VDE approved type is needed, please designate the Option (V4).
©2016-2019
Toshiba Electronic Devices & Storage Corporation
1
Start of commercial production
2013-11
2019-11-26
Rev.5.0


Toshiba Electronic Components Datasheet

TLP2348 Datasheet

Photocoupler

No Preview Available !

4. Packaging and Pin Assignment
11-4L1S
5. Internal Circuit (Note)
TLP2348
1: Anode
3: Cathode
4: GND
5: VO (Output)
6: VCC
Note: A 0.1-µF bypass capacitor must be connected between pin 6 and pin 4.
6. Principle of Operation
6.1. Truth Table
Input
H
L
LED
ON
OFF
Output
L
H
6.2. Mechanical Parameters
Characteristics
Creepage distances
Clearance distances
Internal isolation thickness
Min
Unit
5.0
mm
5.0
0.4
©2016-2019
Toshiba Electronic Devices & Storage Corporation
2
2019-11-26
Rev.5.0


Part Number TLP2348
Description Photocoupler
Maker Toshiba
PDF Download

TLP2348 Datasheet PDF






Similar Datasheet

1 TLP2345 Photocoupler
Toshiba
2 TLP2348 Photocoupler
Toshiba





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy