TLP241AF Datasheet | Toshiba

Features (1) Halogen-free For details, see "Devices in Halogen-Free Resin Packages" at the end of this datasheet. (2) Normally opened (1-Form-A) (3) OFF-state output terminal voltage: 40 V (min) (4) Trigger LED current: 3 m A (max) (5) ON-state current: 2.0 A (max) (6) ON-state resistance: 100 mΩ (max, t < 1 s) 150 mΩ (max, Continuous) (7) Isolation voltage: 5000 Vrms (min) (8) Safety standards UL-recognized: UL 1577, File No.E67349 c UL-recognized: CSA ponent Acceptance Service No.5A File No.E67349 UL-recognized: UL 508, File No.E499232 (Note 1) VDE-approved: EN 60747-5-5, EN 62368-1 (Note 2) Note 1: Please refer Absolute Maximum Ratings (UL-recognized UL 508) for UL 508 products. Note 2: When an EN 60747-5-5 approved type is needed, please designate the Option (D4). 4. Mechanical Parameters Characteristics Creepage distances Clearance distances Internal isolation thickness 7.62-mm Pitch TLP241A 7.0 (min) 7.0 (min) 0.4 (min) 10.16-mm Pitch TLP241AF Unit 8.0 (min) mm 8.0 (min) 0.4 (min) ©2016-2023 Toshiba Electronic Devices & Storage Corporation Start of mercial production 2015-09 2023-05-25 Rev.9.0 5. Packaging (Note) TLP241A TLP241A(LF1,TP1) TLP241A,TLP241AF TLP241A(LF5,TP5) 11-5B2S 11-5B201S TLP241AF(LF4,TP4) 11-5B205S 11-5B202S 11-5B204S Note: Through-hole type: TLP241A, TLP241AF Lead forming option: (LF1), (LF4), (LF5) Taping option: (TP1), (TP4), (TP5) 6. Pin Assignment 1: Anode 2: Cathode 3: Drain 4: Drain 7. Internal Circuit ©2016-2023 Toshiba Electronic Devices & Storage Corporation 2023-05-25 Rev.9.0 TLP241A,TLP241AF 8. Absolute Maximum Ratings (Note) (Unless otherwise specified, Ta =...