TLP3021F Datasheet | Toshiba

TLP3021F(S),TLP3022F(S),TLP3023F(S) TOSHIBA PHOTOCOUPLER Ga As IRED & PHOTO-TRIAC TLP3021F(S),TLP3022F(S),TLP3023F(S) Office Machines Home Appliances Triac Drivers Solid State Relays Unit: mm The TOSHIBA TLP3021F(S), TLP3022F(S) and TLP3023F(S) consist of a gallium arsenide infrared emitting diode optically coupled to a photo-triac in a six-lead plastic DIP. z Peak Off-state voltage: 400 V (min) z Trigger LED current: 15 m A (max) (TLP3021F(S)) 10 m A (max) (TLP3022F(S)) 5 m A (max) (TLP3023F(S)) z On-state current: 100 m A (max) z Isolation voltage: 5000 Vrms (min) z UL recognized: UL1577, File No.E67349 z SEMKO approved: EN60065 EN60950-1 EN60335-1, File No.813274 z BSI approved: BS EN60065:2002, File No.8385 BS EN60950-1:2006, File No.8386 z Option (D4) type VDE approved: DIN EN60747-5-2 Approved No. 40009302 Maximum operating insulation voltage: 1140 VPK Maximum permissible over voltage: 8000 VPK Note: When ordering an EN60747-5-2 approved device, "Option (D4)" should be designated. z Construction mechanical rating 10.16 mm pitch TLPxxxx F Type Creepage Distance Clearance Insulation Thickness 8.0 mm (min) 8.0 mm (min) 0.5 mm (min) JEDEC ― JEITA ― TOSHIBA 11-7A902 Weight: 0.39 g (typ.) Pin Configuration (top view) 1: Anode 2: Cathode 3: N.C. 4:Terminal 1 6:Terminal 2 1 2008-12-08 TLP3021F(S),TLP3022F(S),TLP3023F(S) RESTRICTIONS ON PRODUCT USE - Toshiba Corporation, and its subsidiaries and affiliates (collectively “TOSHIBA”), reserve the right to make changes to the information in this document, and related hardware, software and systems (collectively “Product”) without notice. - This document and any information herein may not be reproduced without prior written permission from TOSHIBA. Even with TOSHIBA’s written permission, reproduction is permissible only if reproduction is without alteration/omission. - Though TOSHIBA works continually to improve Product’s quality and reliability, Product can malfunction or fail. Customers are...